32
Useful adjustment settings
Wide Screen Signalling (WSS)
WSS allows a television to switch automatically among
the different screen formats.
Press MENU and the MENU screen displays.
1
2
Press a/b to select “WSS”, and then press
ENTER.
3
Press c/d to select “Setup”.
Press c/d to select “On” or “Off”, and then
press ENTER.
4
NOTE
• Try to set WIDE mode if an image does not switch to the
correct screen format. When the broadcast signal contains
no WSS information, the function will not work even if
enabled.
Picture aspect ratio
The WSS signal has 4:3 auto-switching that allows you
to select between Normal and Panorama.
Press MENU and the MENU screen displays.
1
2
Press a/b to select “4:3 Mode”, and then
press ENTER.
3
Press c/d to select “Normal” or
“Panorama”, and then press ENTER.
4
WSS signal 4:3 screen
4:3 mode “Normal”
4:3 mode “Panorama”
Press c/d to select “Setup”.
Description
Normal range keeping 4:3 or 16:9 aspect
ratio
Wide image without side bars
Selected item
Normal
Panorama
LC-AX3X(E)-f 05.11.18, 0:59 PM32
To Next Page
Loading...
