Sharp Aquos LC-32AX3X

27
Basic adjustment settings
Colour temperature
Adjusts the colour temperature to give the best white
image.
Press a/b to select “Colour Temp.”, and
then press ENTER.
Description
White with bluish tone
White with reddish tone
Selected item
High
Mid-High
Middle
Mid-Low
Low
Press a/b to select the desired level, and
then press ENTER.
Black
For easier viewing, change the viewing depth by
selecting a level for automatically adjusting the dark
portion of an image.
Press a/b to select “Black”, and then press
ENTER.
Press c/d to select “On”, and then press
ENTER.
Repeat steps 1 to 3 in Colour temperature.
1
2
3
Colour Temp.
Black
3D - Y/C
Monochrome
Film Mode
I/P Setting
On Off
Description
No adjustment
For high detail in black portions
Selected item
Off
On
Press MENU and the MENU screen displays.
1
2
Press c/d to select “Picture”.
3
Press a/b to select “Advanced”, and then
press ENTER.
4
5
Advanced
Advanced setting enables you to set the picture
adjustment in more detail. There are six options you
can choose from.
3D-Y/C
Provides high quality images with minimal dot crawl
and cross colour noise.
Press a/b to select “3D-Y/C”, and then
press ENTER.
Repeat steps 1 to 3 in Colour temperature.
1
2
3
Press a/b to select the desired level, and
then press ENTER.
NOTE
• “3D-Y/C” is not selectable depending on the input signal
type.
• 3D-Y/C may not operate depending on the input signal
type or noisy input signal.
Colour Temp.
Black
3D – Y/C
Monochrome
Film Mode
I/P Setting
Standard
Off
Fast
Slow
Description
3D-Y/C off
Normal adjustment
For movie image
For still image
Selected item
Off
Standard
Fast
Slow
LC-AX3X(E)-d 05.11.18, 0:57 PM27