Sharp Aquos LC-32AX3X

31
Useful adjustment settings
1
2
Image position
For adjusting a picture’s horizontal and vertical position.
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
Description
Centres the image by moving it to the left or right.
Centres the image by moving it up or down.
Selected item
H-Pos.
V-Pos.
4
5
3
Press a/b to select “Position”, and then
press ENTER.
Press a/b to select “H-Pos.” or “V-Pos.”.
Reset
H-Pos. [0] –10 +10
V-Pos. [0] –20
+20
Press c/d to adjust the item to your desired
position.
NOTE
• For resetting all adjustment items to the factory preset values,
press a/b to select “Reset”, and then press ENTER.
• Adjustments are stored separately according to input
source.
Input Label
You can assign each input source a label you like.
Press MENU and the MENU screen displays.
5
Press c/d to select “Setup”.
Press a/b to select “Input Label”, and then
press ENTER.
6
Repeat the above until the name is fully spelt
out, and then press ENTER.
• The name can be 6 characters or less.
• When you want to set an input source name of
less than 6 characters, select “END”, then press
ENTER to exit from the labelling menu.
A
BACK
CLEAR
END
K
U
B
L
V
C
M
W
D
DVD
N
X
E
O
Y
F
P
Z
G
Q
+
H
R
– _
I
S
.
J
T
0123456789
INPUT SOURCE
TV
INPUT1
INPUT2
DVD
INPUT4
Press a/b/c/d to select each character
of the new name for the input source, and
then press ENTER.
(Example)
NOTE
• You cannot change labels if the INPUT SOURCE is TV.
Press TV/VIDEO to select the desired input
source.
1
2
4
3
(Example)
LC-AX3X(E)-f 05.11.18, 0:59 PM31