Colour Temp.
Adjust the colour temperature to give the best white
image.
Film Mode
Automatically detect a film-based source (originally
encoded at 24/25 frames/second, depending on the
vertical frequency), analyses it then recreates each still
film frame for high-definition picture quality.
100Hz (truD
®
)
100Hz (truD
®
) technology provides superior solutions
for digital display picture quality removing motion blur
and film judder.
NOTE
• Select “On” under “Demo” in the “Option” menu to show
the 100Hz (truD
®
) demonstration in a dual screen format.
(See page 19)
• This effect is greater on fast moving images such as film
contents.
Audio menu
AV Mode
Menu Operation: A (page 12)
This option links to AV Mode in the Picture menu. (See
page 13.)
Audio adjustments
Menu Operation: B (page 12)
You can adjust the sound quality to your preference
with the following settings.
Selectable
items
c button d button
Treble
For weaker treble For stronger treble
Bass
For weaker bass For stronger bass
Balance
Decrease audio from
the right speaker
Decrease audio from
the left speaker
Black
For easier viewing, change the viewing depth by
selecting a level for automatically adjusting the dark
portion of an image.
3D-Y/C
Provide high quality images with minimal dot crawl and
cross colour noise by detecting changes in the image.
NOTE
• 3D-Y/C may not operate depending on the input signal
type or noisy input signal.
• 3D-Y/C has even more effect on composite video signals
(CVBS).
Monochrome
For viewing a video in monochrome.
NOTE
• When Monochrome is set to “On”, the DTV Menu screen
displays in monochrome.
High: White with bluish tone
Mid-High:
Intermediate tone between High and Middle
Middle:
Natural tone
Mid-Low:
Intermediate tone between Middle and Low
Low:
White with reddish tone
Off: No detecting
Standard: Normal adjustment
Fast: Set the optimum image quality for fast-moving
images.
Slow: Set the optimum image quality for slow-moving
images.
14
Item
Item
TV/DTV/AV only
To Next Page
Loading...
