Sharp Aquos LC-37D33X - Using the Programme Guide and EPG

39
Audio adjustment
You can adjust the audio of the selected AV mode.
Press
c
/
d
to select “Audio”.
2
Press MENU and the MENU screen displays.
1
MENU
[
Audio
]
Audio Power Control
Treble
Bass
Balance
Surround
Reset
[Off]
[Off]
[0]
[0]
–15
L
+15
[0] –15
+15
R
DYNAMIC
Bass Enhancer
Watching TV
NOTE
• For resetting all adjustment items to the factory preset
values, press
a
/
b
to select “Reset”, press ENTER, press
c
/
d
to select “Yes”, and then press ENTER.
Press
a
/
b
to select the desired menu item.
Press ENTER to proceed if necessary.
3
Press
a
/
b
or
c
/
d
to select the desired item
or adjust the item to the desired level. Press
ENTER if necessary.
4
Selected item
c
button
dbutton
Treble For weaker treble For stronger treble
Bass For weaker bass For stronger bass
Balance Decrease audio from
the right speaker
Decrease audio
from the left speaker
Press
c
/
d
to select “Option”.
Press MENU and the MENU screen displays.
1
2
Press
c
/
d
to select “Fixed” or “Variable”, and
then press ENTER.
Press
a
/
b
to select “Output Volume Select”,
and then press ENTER.
3
4
H Surround
When you set to “On”, you can enjoy surround sound,
the same as if you were in a movie theatre.
Selected item Description
On Makes it possible to enjoy natural,
realistic surround sound.
Off Outputs the normal sound.
Output Volume Select
Allows you to select what controls the audio output.
NOTE
• The “Audio” menu cannot be operated when headphones
are plugged in or when “Variable” is selected.
Variable
Adjustable with remote
control
(No sound from the speakers)
Fixed
Audio output settings
Selected item Description
Fixed • Sound via speakers is adjusted with VOL
e
/
f
on the remote control unit or the
TV.
• Sound via the MONITOR OUTPUT
terminal is not adjustable and constantly
outputs.
Variable • Sound via the MONITOR OUTPUT
terminal is adjusted with VOL
e
/
f
on
the remote control unit or the TV.
• Sound via speakers is muted.
Repeat steps 1 to 2 in Audio Adjustment.
1
Press
a
/
b
to select “Surround”, and then
press ENTER.
2
Press
c
/
d
to select “On”.
3
H Bass Enhancer
This function allows you to enjoy bass-enhanced
sound.
Press
a
/
b
to select “Bass Enhancer”, and
then press ENTER.
Repeat steps 1 to 2 in Audio Adjustment.
1
2
Press
c
/
d
to select “On”.
3
Selected item Description
On Bass Enhancer function is on.
Off Outputs the normal sound.
32D33X_en_f.indd 3932D33X_en_f.indd 39 2008-3-11 9:20:192008-3-11 9:20:19