Press
c
/
d
to select “Yes”, and then press
ENTER.
• “Now, TV will restart automatically. OK?” displays
on the screen.
Press
c
/
d
to select “Yes”, and then press
ENTER.
• “Now initialising...” displays on the screen and
blinks.
• After the reset has completed, the power shuts
off and then comes back on. The screen will have
returned to its original settings.
Now initialising...
If you have already set the password, enter it
here.
• “Return to factory pre-settings” displays on the
screen.
69
Appendix
Press
a
/
b
to select “Reset”, and then press
ENTER.
3
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Setup”.
2
Reset
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
Receiver Report
Display reports regarding failures and changes for
timer settings.
Information
Identifi cation
You can check the current version of the software on
the screen.
Message List
When a new broadcast station is detected, the
message is updated in the “Message List” of the
“Information” menu.
4
5
6
32D33X_en_j.indd 6932D33X_en_j.indd 69 2008-1-24 16:52:232008-1-24 16:52:23
To Next Page
Loading...
