Sharp AQUOS LC-40LE814E

14
Quick guide
E Searching for cable broadcasts
To change each item to the appropriate
settings:
1 Pressa/btoselectthemenu,andthen
press;.
Scrambled stations [Yes]
Search method [Channel]
Start frequency
Network ID [None]
Symbol rate 1
Symbol rate 2
QAM modulation 1
QAM modulation 2
Reset
Search start
2 Pressa/b/c/dor0_9toselectorinput
theappropriateitem/value,andthenpress
;.
3 Pressa/btoselect“Searchstart”,andthen
press;.
4 Pressc/dtoselect“Yes”tostartsearching
cablebroadcasts,andthenpress;.
5 TheTVsearchesfor,sortsandstoresall
thereceivableTVstationsaccordingtotheir
settingsandtheconnectedantenna.
• Toaborttheinitialautoinstallationinprogress,press6.
After searching for DVB-C channels, the
screen switches to the “Satellite search”
setting (Page 15).
H
• The“Scrambledstations”menuandthe“Searchmethod”
menuarenotdisplayedonthescreenaseachmenuitemis
fixed.
• Thevalueof“Startfrequency”and“NetworkID”shouldbeset
tothevaluespecifiedbythecableprovider.
Menu Description Selectable items
Scrambled
stations
Specifiesifyou
needtoaddpay-TV
services.
Yes,No
Search
method
Specifieshowyou
searchchannels.
Channel:Extractsall
ofinformationfroma
channel(quick,but
needscorresponding
TVstations).
Frequency:Checks
everyfrequencyin
range(slow).
Quick*
2
:Allservices
aresearchedby
onefrequency.This
menuworksonly
whenyourcable
providerprovides
thefrequencyand
thenetworkID(e.g.,
Homingchannel).
Start
frequency
From47.0_858.0
MHz
Network ID
Specifiesthenetwork.
Setthistoregister
onlythespecified
networkIDwithout
registeringanyspecial
services.
None,0_65535
Symbol rate
1*
1
Thesymbolrates
arespecifiedbythe
cableprovider.Input
thevaluereceivedfor
CATV.
1000_9000
Symbol rate
2*
1
Thesymbolrates
arespecifiedbythe
cableprovider.Input
thevaluereceivedfor
CATV.
1000_9000
QAM
modulation 1
16,32,64,128,256
QAM
modulation 2
None,16,32,64,
128,256
I Setup“Symbolrate2”ifthecableproviderusesseveral
symbolrates.
J When“Quick”isselected,“Scrambledstations”isautomatically
setto“No”.
J When“Quick”isselected,“None”forthe“NetworkID”menu
cannotbeselected.
H
• Whenyouset“Sweden”inthecountrysettingandselect
“Cable”forthesearchingformat,youcanselectthecable
provider“ComHem”.Followthescreenprompts.
Analogue broadcast setting
The TV searches for, sorts and stores all the
receivable TV stations according to their
settings and the connected antenna.
• Toaborttheinitialautoinstallationinprogress,press6.
After searching for analogue channels, the
screen switches to the “Satellite search”
setting (Page 15).