15
Searching for satellite broadcasts
Pressc/dtoselect“Yes”,andthenpress;.
Yes
No
• Ifyoudonotperform“Satellitesearch”setting,select
“No”,andthenpress;.
• ThecurrentDVB-S/S2settingscreenisdisplayed.
Next
other
Satellite
LNB Frequency
Low High
Satellite System
Max. 4 satellites on DiSEqC multiswitch
Change setting
• Youmustfirstcomplete“Changesetting”beforemoving
tothe“Next”setting.
1 When starting the satellite search
after setting the scrambled stations:
Press c/d to select “Next”, and then press
;.
NOTE
• Whenyouperformtheinitialautoinstallation,“Next”cannotbe
selected.Completing“Changesetting”enablesyoutoselect
“Next”.
Start search
other
Satellite
Symbol rate 1 Symbol rate 2
Scrambled stations: No
Change setting
E Start search:
DVB-S/S2channelsearching.
1 Press c/d to select “Start search”, and then
press ;.
2 The TV searches for and stores all the
receivable TV stations according to their
settings and the connected antenna.
• Select“Yes”tosortthesearchresultinalphabetical
order.
• Toaborttheinitialautoinstallationinprogress,press6.
E Change setting:
1 Press c/d to select “Change setting”, and
then press ;.
• Thesettingscreenof“Scrambledstations”and“Symbol
rate”isdisplayed.
Scrambled stations [No]
Search start
SAT1-Symbol rate 1
SAT1-Symbol rate 2
SAT2-Symbol rate 1
Yes No
2 Press a/b to select “Scrambled stations”,
and then press ;.
• Scrambledstations:Specifiesifyouneedtoaddpay-TV
services.
3 Press c/d to select “Yes”, and then press
;.
4 Press a/b to select the symbol rate you
want to modify, and then press ;.
• Symbolrate:Youneedtoseteachsymbolrateofall
thesatellitebroadcaststhattheTVcanreceive(eight
isthemaximumnumberofsymbolratesthatcanbe
displayed).
5 Press c/d to select “Search start”, and then
press ;.
6 The TV searches for and stores all the
receivable TV stations according to their
settings and the connected antenna.
• Select“Yes”tosortthesearchresultinalphabetical
order.
• Toaborttheinitialautoinstallationinprogress,press6.
Quick guide