10
Display (rear view)
Setting the TV
After putting the Display in place, connect the AC cord. Use the cable clamp for bundling the cables.
Preparation
Connecting the AC cord to the Display
1
2
3
Removing the terminal cover
Bundling the cables with the clamp
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.
Press down the hooks
to remove the cover
toward you.
AC cord (with
Ferrite core)
Cable clamp
Insert the cable clamp in the hole on the Display as shown.
To Next Page
Loading...
