11
Attaching speakers
Preparation
NOTE
• Perform the same steps for right speaker.
• To remove the speakers, perform the steps in reverse order.
CAUTION
• Do not remove the stand and speaker from the Display unless using an optional bracket to mount it.
• Before performing work spread cushioning over the base area to lay the Display on. This will prevent it from
being damaged.
1
2
3
6
5
4
7
8
Remove the terminal cover as shown in the illustration.
Fasten the screw.
Connect the ends of the cable to the speaker
terminals as shown in the illustration. Connect
leads to speaker terminals of the same color.
Insert the projecting bulges on the side of the
speakers into the corresponding slots in the display.
Attach the speaker terminal cover.
Fasten the bracket with the screw.
Attach the terminal cover as shown in the
illustration.
Align nub of the bracket with the groove and slot it
into place.
Screw
(BLACK)
Screw
(SILVER)
To Next Page
Loading...
