Watching TV
You can change channels
in
several ways.
INPUT
FLASHBACK
o
Method 1
Using
CH
/\/V
on the remote control unit or on the
lV.
Method 2
1 Press FLASHBACK to switch to the previously
tuned channel.
2 Press FLASHBACK again to switch back to the
currently tuned channel.
BJmrl)
• FLASHBACK will not work
if
no channel has been
changed after the TV
is
turned on.
Method 3
Using remote control buttons 0-9, •
(DOT)
to select
channels for VHF/UHF/CAlV/DIGITAL.
To select a 1 or 2-digit channel
number
(e. g., Channel 5):
Press 5-?ENT
-~-
BJmrl)
• When selecting a 1-digit channel number,
it
is
not
necessary
to
press 0 before the number.
• When you enter
0-9
only, channel selection will be made
if
there
is
no operation within a few seconds.
VOL
SURROUND!)
o -
CH
MUTE
o
To
select a 3-digit channel
number
(e. g., Channel 115):
Press 1-?1-?5-?ENT
FREEZE
MENU
O~o
8s8
EXIT
C'-----'"')
RETURN
O~o
- FAVORITE CH -
0®@@
AQuas
@-
18
To select a 4-digit channel
number
(e. g., Channel 22.1):
Press 2 -?2-? •
(DOT)
-?
1-?ENT
~_~.
z
~_~_
BJmrl)
• When you enter
0-9
only, channel selection will be made
if
there
is
no operation within a few seconds.
•
If
you push "0" by itself, nothing will happen.
• Complete the above steps within a few seconds.
• When you enter
0-9
and •
(DOT),
channel selection will be
made
if
there
is
no operation within a few seconds.
Watching TV
You can change channels
in
several ways.
INPUT
FLASHBACK
o
Method 1
Using
CH
/\/V
on the remote control unit or on the
lV.
Method 2
1 Press FLASHBACK to switch to the previously
tuned channel.
2 Press FLASHBACK again to switch back to the
currently tuned channel.
BJmrl)
• FLASHBACK will not work
if
no channel has been
changed after the TV
is
turned on.
Method 3
Using remote control buttons 0-9, •
(DOT)
to select
channels for VHF/UHF/CAlV/DIGITAL.
To select a 1 or 2-digit channel
number
(e. g., Channel 5):
Press 5-?ENT
-~-
BJmrl)
• When selecting a 1-digit channel number,
it
is
not
necessary
to
press 0 before the number.
• When you enter
0-9
only, channel selection will be made
if
there
is
no operation within a few seconds.
VOL
SURROUND!)
o -
CH
MUTE
o
To
select a 3-digit channel
number
(e. g., Channel 115):
Press 1-?1-?5-?ENT
FREEZE
MENU
O~o
8s8
EXIT
C'-----'"')
RETURN
O~o
- FAVORITE CH -
0®@@
AQuas
@-
18
To select a 4-digit channel
number
(e. g., Channel 22.1):
Press 2 -?2-? •
(DOT)
-?
1-?ENT
~_~.
z
~_~_
BJmrl)
• When you enter
0-9
only, channel selection will be made
if
there
is
no operation within a few seconds.
•
If
you push "0" by itself, nothing will happen.
• Complete the above steps within a few seconds.
• When you enter
0-9
and •
(DOT),
channel selection will be
made
if
there
is
no operation within a few seconds.
To Next Page
Loading...
