Sharp Aquos LC-46D82U

Basic adjustment settings
This lV provides various advanced functions for
optimizing the picture quality.
Provides high quality images with minimal dot crawl
and cross color noise.
Press
MENU to display the MENU screen,
and then press
..... /~ to select "Picture".
Standard
Normal adjustment
Press ~.lT to select "Advanced", and then
press
ENTER.
Fast
Slow
For moving images
For still images
Detects, analyzes, converts film
source
On
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyzes it then
recreates each still film frame for high-definition picture
quality.
• 3D-Y/C is available for input signal from Composite Video
and analog broadcasts (air and cable).
For viewing a video in monochrome.
White with Reddish tone
t
White with Bluish tone
Press ~.lT to select a specific adjustment
item, and
,then press ENTER.
• You can select "Color Temp.", "Black", "Fine
Motion Advanced", "3D-Y/C", "Monochrome",
"Film Mode" or "Range
of OPC".
High
Mid-High
Middle
Mid-Low
Low
Press .. /T (or ...... /~) to select the desired
parameter.
• See the table for the selectable parameters.
Press MENU to exit.
For a better white balance, use color temperature
correction.
- 15 through +16
- 16 through
+15
Normal viewing mode
Min.
Max.
Off
The brightness level range of the OPC sensor's
automatic adjustments can be set according
to your
preferences. The adjustment range of the OPC sensor
can be set to a maximum of
+16 and a minimum of
-16.
No adjustment
Off
Use Fine Motion Advanced to view fast-action video
more clearly.
Changes the viewing depth by automatically adjusting
the dark portion of
an image for easier viewing.
Normal image
• Fine Motion Advanced may cause image noise.
If this
occurs turn the function "Off".
• The range of OPC settings are active only when the OPC
is
set to On.
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range
is
small.
@-27