Basic adjustment settings
Adjusts the picture to your preference with the following
picture settings.
Press
MENU
to
display the MENU screen,
and then press
......
/~
to
select "Picture".
Automatically adjusts the brightness of the screen.
Press
MENU to display the MENU screen,
and then press
......
/~
to
select "Picture".
Press
./T
to select
"ope".
Press
./T
to select a specific adjustment
item.
Press
......
/~
to select "On" or "On: Display".
Press
......
/~
to adjust the item to the desired
level.
Press
MENU to exit.
Off
The brightness
is
fixed at the value set
in
"Backlight".
On
Automatically adjusts
• For resetting
all
Picture adjustment items to the factory
preset values, press
~/"
to
select "Reset", press ENTER,
press
......
/~
to
select "Yes", and then press ENTER.
On: Display
Displays the OPC effect on the screen
while adjusting the brightness
of
the
screen.
Press MENU to exit.
• When set to "On", the OPC senses the surrounding light
and automatically adjusts the backlight
brightness~
Make
sure nothing obstructs the OPC sensor, which could affect
its ability to sense surrounding light.
• When set
to
"On: Display", OPC effect displays on the
screen while the OPC adjusts the screen brightness.
•
•
-
~
.....
~:
I':
•
II!!
1:'1
iii
•
n
I
!!III
Picture
Backlight The screen dims The screen
brightens
Contrast For less contrast For more contrast
Brightness For less brightness For more brightness
Color For less color For more color
intensity intensity
Tint Skin tones become Skin tones become
reddish greenish
Sharpness
For less sharpness For more sharpness
• Select "Advanced" and then press ENTER to set "Color
Temp.", "Black", "Fine Motion Advanced", "3D-Y/C",
"Monochrome", "Film Mode"
or
"Range of OPC". See page
27.
@-26
To Next Page
Loading...
