Sharp Aquos LC 65D64U

Signal Strength
Channel Strength
Signal Strength
Current Max00
Signal Strength
Current
CH
Max0
12
0
Signal Strength
Channel Strength
24
Basic adjustment settings
Antenna Setup - DIGITAL
In order to receive digital air broadcasts, you need
a digital broadcast antenna. You can confi rm the
antenna confi guration through the “Antenna Setup -
DIGITAL” screen.
If necessary, adjust the direction of the antenna to
obtain the maximum signal strength.
Signal Strength
• On: Skips channels. (Channel selection disabled using CH
r
/
s
.)
• Off: Does not skip channels. (Channel selection enabled
using CH
r
/
s
.)
Press
a
/
b
to select ANALOG (Air), ANALOG
(Cable), DIGITAL (Air) or DIGITAL (Cable), and
then press ENTER.
When viewing ANALOG broadcasts:
1
Press
c
/
d
to select the channel to skip,
and then press
b
to move down.
2
Press
c
/
d
to select “On”, and then press
ENTER.
When viewing DIGITAL broadcasts:
1
Press
a
/
b
to select the channel to skip,
and then press
c
/
d
to select “On”.
Press MENU to display the MENU screen, and
then press
c
/
d
to select “Setup”.
Press
a
/
b
to select “CH Setup”, and then
press ENTER.
• If you already set the Secret No., input the 4-digit
secret number here. See page 41 for setting a
secret number.
Press
a
/
b
to select “CH Memory”, and then
press ENTER.
Channel memory setting
Press MENU to display the MENU screen, and
then press
c
/
d
to select “Setup”.
Press
a
/
b
to select “Antenna Setup -
DIGITAL”, and then press ENTER.
Channel Strength
The channel signal strength can also be checked
separately.
Repeat steps 1 and 2 in Signal Strength in
Antenna Setup - DIGITAL.
Input the 2-digit channel number to check the
signal strength of the selected channel.
• Make sure the signal is strong enough for each
channel.
Press
a
/
b
to select “Channel Strength”, and
then press ENTER.
Press
a
/
b
to select “Signal Strength”.
• The signal strength of DIGITAL channel is
displayed. The signal information is based on the
current channel.
NOTE
• This function is available for DIGITAL (Air) only.
1
2
3
4
5
1
2
3
1
2
3
NOTE
• Make sure what kind of connection is made with your TV.
Press MENU to exit.
6
Press MENU to exit.
4
Press MENU to exit.
4
LC-65D64UE.indb24LC-65D64UE.indb24 2007/07/1114:40:402007/07/1114:40:40