>>
<<
On-Screen Display Menu
ENG 4-12
Example
Initial Setup (Continue)
Advanced
AQUOS LINK Setup
Make the settings to use LINK Operation.
Set the settings with "Initial Setup" > "Advanced" > "AQUOS
LINK Setup".
(See page 6-2.)
Secret No.
Allows you to use a secret number to protect certain
settings from being accidentally changed.
IMPORTANT:
Three conditions must be met to enable the V-Chip
1. Secret No. is registered.
2. V -Chip/V-Chip (DTV Only) settings have been made.
The "V-Chip (DTV Only)" will only be selectable when
a new rating system can be downloaded via digital
broadcasting in the U.S.
3. "Status" is set to "Enable".
Setting Secret No.
You can set and change the secret number by using 0-9.
New Secret No.: Changes or sets the Secret No.
Confirm Secret No: Enter Secret No. to confirm.
NOTE
As a precautionary measure, make a note of your secret
number and keep it in a familiar place.
Reset
If complex adjustments are made and the settings cannot
be restored to normal, you can reset the settings to the
factory preset values.
If you have already set the Secret No., input the 4-digit
secret number here.
To Next Page
Loading...
