enjoy video and audio from the device on the TV's large screen and speakers.
1 Press INPUT and select "Miracast".
2 Enable the Miracast function on the Miracast device and connect to the TV.
(The TV screen changes according to the behavior of the device)
NOTE
When the TV is turned off or the connection is ended on the device, you must connect the
device again.
For details about the operation of the Miracast-compatible device, check the manual for that
device.
When the Miracast device is connected to the TV over a wireless LAN, Miracast video may be
distorted and Miracast audio may be interrupted depending on the status of the TV's
connection to the access point.
To Next Page
Loading...
