>>
<<
On-Screen Display Menu
ENG 4-26
Example
Smart TV (Continue)
Remote Control Link
Test Connection
9 Select "Send" and press ENTER to allow the IR blaster
dongle to send command to your set-top box.
NOTE
The number of available codes varies depending on the
chosen manufacturer.
If more than one code is available for the manufacturer
of your set-top box, select "No, try again" to retry
sending another command to your set-top box.
10 If the TV changes to CH10, press / to select "Yes"
and press ENTER to continue.
NOTE
When the right code is sent, the TV will automatically
change its channel to CH10.
11 Select "OK" and press ENTER to complete the setup.
To Next Page
Loading...
