8
Inserting USIM Card
Always power off beforehand.
Use notch (○) to open Card Slot Cover
Pull out USIM Tray
・Do not pull USIM Tray forcefully or at an angle; damage may
result. Gently pull it out horizontally from the edge.
Place USIM Card in USIM Tray
・Check orientation of USIM Card (see notch), then gently
place it with IC chip (metal) facing up.
Insert USIM Tray into USIM Card Slot (bottom opening)
・Check orientation of USIM Tray, then gently insert it all the
way horizontally.
Close Card Slot Cover
・
Reinsert hinge ( ) as shown ( ), then press Card Slot
Cover back into place by pushing it in the direction of the
arrow ( ).
・Press ○ areas firmly and make sure that there is no gap
between Card Slot Cover and handset.
To Next Page
Loading...
Need help?
General
