21
MAKING COPIES
Copying from the original table
COPYING FROM THE ORIGINAL TABLE
Two-sided copies from one-sided originals
1
Place the first original face down on the original table
and close the document feeder cover.
2
Use the ORIGINAL TO COPY key to select .
3
Ensure that the desired paper tray is selected.
●
Paper sizes that can be used in the duplex mode are 8-1/2" x 11", 8-1/2"
x 11"R, 8-1/2" x 14", and 11" x 17".
●
5-1/2" x 8-1/2" size paper cannot be used in the duplex mode.
●
The bypass tray cannot be used in the duplex mode.
4
Set the number of copies and press the START key.
●
The indicator will blink.
●
The copy will not be output until both sides have been scanned.
To Next Page
Loading...
