AR-M256/M257/M258/M316/M317/M318/5625/5631 SIMULATION 8 - 40
Operation/procedure
1. Touch the item to be adjusted.
The currently set value is highlighted beside the adjustment item.
2. Press the [START] key.
The display is shifted to the adjustment value entry menu.
3.
Enter the adjustment value with the 10-key, and press the [START] key.
When the [CUSTOM SETTINGS] key is pressed, the display returns to
the original state (adjustment item selection menu).
* Auto exposure mode
• When SIM 26-6 (Destination setup) is changed from EX Japan to
Japan, the setup value becomes 1 (Default: Japan). If, on the con-
trary, it is changed from Japan to EX Japan, the set value becomes 2
(Default: EX Japan)
• If the auto exposure mode setup value is changed, the setup value of
SIM 46-30 (AE limit setup) is reset to the default value.
Operation/procedure
1. Touch the item to be adjusted.
The adjustment item and the currently set value are highlighted.
2. Enter the set value with the 10-key.
Operation/procedure
1. Touch the item to be adjusted.
The adjustment item and the currently set value are highlighted.
2. Enter the set value with the 10-key.
If SIM 26-6 (Destination setup) and SIM46-19 (Auto exposure mode)
are changed, this setup is also changed to the default value accord-
ingly.
Operation/procedure
1. Touch the item to be adjusted.
The adjustment item and the currently set value are highlighted.
2. Enter the set value with the 10-key.
Enter the set value with the 10-key.
46-19
Purpose Adjustment
Function
(Purpose)
Used to set the control method of the exposure mode.
Item Picture quality
Item Content Default
1
AE MODE
(1:EXPOSURE
2:TONER)
Auto exposure mode*
(1: Priority on Image quality,
2: Priority on toner consumption)
2
2
AE STOP(COPY)
(0:FIXED
1:REAL TIME)
Auto exposure STOP mode
(COPY)
(0: Fixed, 1: Real-time)
0
3
AE STOP(FAX)
(0:FIXED
1:REAL TIME)
Auto exposure STOP mode (FAX)
(0: Fixed, 1: Real-time)
0
4
AE STOP(SCAN)
(0:FIXED
1:REAL TIME)
Auto exposure STOP mode
(SCANNER)
(0: Fixed, 1: Real-time)
0
46-20
Purpose Adjustment
Function
(Purpose)
Used to set the exposure correction value of SPF/
RSPF for OC exposure.
Item Picture quality
Item Content Setting range Default
1
SPF EXPOSURE
SPF
1-99 53
2
RSPF EXPOSURE
RSPF
46-30
Purpose Setting
Function
(Purpose)
Used to set the AE and the limit value in AE
(Toner save).
Item Setting range Default
1AE
0-31 0
2 AE(TS)
46-31
Purpose Setting
Function
(Purpose)
Used to set the AE and the limit value in AE
(Toner save).
Item Setting range Default
1AE
0-2 1
2 TEXT
3 TEXT/PHOTO
4PHOTO
46-39
Purpose Setting
Function
(Purpose)
Used to switch the FAX send image quality.
Item Content Setting range Default
0HAIRLINE
Original with pencil lines
and thin lines
0-1 0
1 PRINTER Printed original
SIMULATION 46-31
㪪㪟㪘㪩㪧㪥㪜㪪㪪㩷㪪㪜㪫㪫㪠㪥㪞㪅㩷㪠㪥㪧㪬㪫㩷㪭㪘㪣㪬㪜㩷㪇㪄㪉㪃㩷㪘㪥㪛㩷㪧㪩㪜㪪㪪㩷㪪㪫㪘㪩㪫㪅㩷
㪈㪑㩷㪘㪜㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㪈㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷 㩷 㩷㩷㩷 㩷㩷 㩷㩷㪈㩷
㪉㪑㩷㪫㪜㪯㪫㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㪈㩷
㪊㪑㩷㪫㪜㪯㪫㪆㪧㪟㪦㪫㪦㩷 㩷㩷㩷㩷㩷㩷㪈㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷 㩷 㪈㪆㪈㩷
㪋㪑㩷㪧㪟㪦㪫㪦㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷 㩷 㩷㪈㩷
㩷
㸡
㸣
㪦㪢
To Next Page
Loading...
