AR-M350U CONSUMABLE PARTS 5-2
2.Production number identification
A. Drum cartridge
The lot number, printed on the front side flange, is composed of 10 digits,
each digit showing the following content:
B. Toner cartridge
The lot number is composed of 7 digits, and each digit indicates as
following.
The lot number shall is printed in the position shown below.
C. Developer
The lot number is composed of 8 digit, and each digit indicates as
following.
The lot number shall be printed on the bag.
3. Environmental conditions
A. Operating conditions
B. Storage conditions
12345678910
1 Number
For this model, this digit is 2.
2 Alphabet
Indicates the model conformity code. T for this model.
3 Number
Indicates the end digit of the production year.
4 Number or X, Y, Z
Indicates the production month.
X stands for October, Y November, and Z December.
5/6 Number
Indicates the production day on the month.
7 Number or X, Y, Z
Indicates the month of packing.
X stands for October, Y November, and Z December.
8/9 Number
Indicates the day of the month of packing.
10 Alphabet
Indicates the production factory. "A" for Nara Plant.
12 34567
1 Version number (A - sequentially revised)
2 Numeral figure
Indicates the end digit of the production year.
3 Alphabet
Indicates the production factory. (B for SOCC)
4 Destination code
5,6 Numeral figures
Indicates the production day.
7 Numeral figure or X, Y, Z
Indicates the production month.
X stands for October, Y November, and Z December.
Lot No. Location
Lot No. Location
Aluminum bag
Heat seal
12345678
1 Alphabet
Indicates the production factory.
2Figure
Indicates the production year.
3/4 Figure
Indicates the production month.
5/6 Figure
Indicates the production day.
7 Hyphenation
8Figure
Indicates the production lot.
Temperature
Humidity (%)
85
20
10 35
(Without dew condensation)
30
85%
35
60%
Temperature
Humidity (%)
90
20
-10 40
(Without dew condensation)
"# $%&'(
To Next Page
Loading...
