Sharp AR-M451U

AR-M351U/M451U, AR-M355U/M455U MAINTENANCE AND DETAILS OF EACH SECTION 7 - 51
a. Scanner unit
a-1. OC
1) Remove the OC cover.
a-2. Dust-proof glass
a-3. Table glass
a-4. White reference glass
1) Remove the table glass holder and the white reference glass
holder, and remove the table glass and the white reference
glass.
a-5. Mirror
1) Remove the table glass.
2) Clean mirror.
a-6. Rails
1) Remove the table glass.
2) Grease up the rails.
a-7. Drive wire
a-8. Pulley
a-9. Drive belt
1) Remove the table glass.
2) Check the drive wire, pulley and drive belt.
a-10. Scan motor
1) Remove the scanner rear cabinet and the rear lower cabinet.
1)
1)
2)
3)
4)
3)
1)
2)
1)
3)
4)
4)
5)
6)
1)
1)
2)
3)
3)
4)