Sharp AR-M451U User Manual (English)

Other manuals for Sharp AR-M451U

Operation Manual64 pages

Service Manual276 pages

User Guide7 pages

Questions and Answers:

C
Cynthia AndersonAug 6, 2025
What to do if the Sharp printer recipient does not receive data sent by e-mail (Scan to E-mail)?
- L
  Lisa GambleAug 6, 2025
  If the recipient does not receive data sent by e-mail, it may be because a limit has been set in the "Maximum size of e-mail attachments" of the key operator program. The limit can be set from 1 MB to 10 MB in the key operator program. Consult your key operator and select a suitable limit. Also, the amount of data that can be sent in one e-mail transmission is sometimes limited by the administrator of the mail server. Decrease the amount of data sent in the e-mail transmission (reduce the number of pages scanned).
H
Holly GoldenAug 11, 2025
Why is the Sharp printer transmission taking a long time?
- H
  haileyrichardsonAug 11, 2025
  Transmission can take a long time if there's a large amount of image information, resulting in a large data file. To address this, adjust the resolution and data compression settings to suit the transmission's purpose, balancing resolution and file size. If the original document doesn't have photos or illustrations, using "300x300dpi" (E-MAIL/FTP mode) or "STANDARD" (Internet-Fax mode) can provide a more workable scanned image. Reserve higher resolution modes for originals with photographs when image quality is a priority.
J
Jeanne MayAug 16, 2025
What to do if the Sharp printer scanned image is clipped?
- T
  Theresa HernandezAug 16, 2025
  If the scanned image is clipped, it could be because the set original scanning size is smaller than the actual original size. Set the scanning size to match the actual original size. If you intentionally set a smaller size, position the original using the guides, considering the set original size.
A
angela26Aug 20, 2025
What to do if the Sharp printer scanned image is upside down or on its side?
- C
  Christopher AndersonAug 20, 2025
  If the scanned image is upside down or on its side, it is likely that the original was not placed in the correct orientation. Place the original in the correct orientation.
C
Caitlyn RobinsonAug 26, 2025
What to do if the Sharp printer scanned image range is on the opposite side of the selected image range?
- S
  Stacy KellyAug 26, 2025
  If the scanned image range is on the opposite side of the selected image range, it means that the original was placed with the left and right sides reversed. Place the original in the correct orientation.
K
Kathy RamirezAug 31, 2025
What to do if the received image data from Sharp printer cannot be opened?
- R
  robert25Aug 31, 2025
  If the received image data cannot be opened, it may be because the viewer program used by the recipient does not support the format of the received image data. Try selecting a different file type (TIFF or PDF) and/or a different compression format (NONE, MH (G3), or MMR (G4)) when sending the image data. Otherwise, open to use Sharpdesk or a viewer program that supports the above combinations of file types and compression formats.