Sharp AR-M455U - Page 183

AR-M351U/M451U, AR-M355U/M455U SIMULATION 9 - 47
Operation/Procedure
1) Select the number corresponding to one of the following
adjustment items with 10-key. (Select one of 0 - 5.)
∗ Normal mode (Image density adjustment level)
∗ Auto mode
2) Press [START] key.
3) Enter the image density adjustment value with 10-key.
4) Press [START] key or press [CUSTOM SETTINGS] key.
The adjustment value is set.
NOTE: Only the set value is changed and no printing is performed.
Operation/Procedure
1) Select the number corresponding to one of the following
adjustment items with 10-key. (Select one of 0 - 11.)
∗ Normal mode (Image density adjustment level)
∗ Normal mode (Image density adjustment level) (Half-tone
mode)
∗ Auto mode
∗ Auto mode (Half-tone mode)
2) Press [START] key.
3) Enter the image density adjustment value with 10-key.
4) Press [START] key or press [P] key.
The adjustment value is set.
NOTE: Only the set value is changed and no printing is performed.
Press [START] key. Press [START] key, or
press [CUSTOM SETTINGS] key.
46-22
Purpose Adjustment
Function
(Purpose)
Used to adjust the scanner exposure level in the
normal text mode.
Item Picture quality Density
Item
Set
range
Default
0 AUTO Auto 0 - 99 50
1 1.0 Exposure level 1
2 2.0 Exposure level 2
3 3.0 Exposure level 3
4 4.0 Exposure level 4
5 5.0 Exposure level 5
Select other than 0 - 5, and
press [START] key.
Press [START] key, or press
[CUSTOM SETTINGS] key.
0
SIMULATION 46-21
EXP.LEVEL SETUP SCANNER(AUTO SET), PRESS START.
0.SCANNER EXP.LEVEL 50
50
SIMULATION 46-21
EXP.LEVEL SETUP SCANNER(AUTO SET), INPUT VALUE 0-99,
AND PRESS START.
0.SCANNER EXP.LEVEL
1
SIMULATION 46-22
EXP.LEVEL SETUP SCANNER(NORMAL). SELECT 0-5, AND PRESS
START.
0.AUTO 50 1.1.0 50 2.2.0 50
3.3.0 50 4.4.0 50 5.5.0 50
50
SIMULATION 46-22
EXP.LEVEL SETUP SCANNER(NORMAL), INPUT VALUE 0-99, AND
PRESS START.
0.AUTO
46-23
Purpose Adjustment
Function
(Purpose)
Used to adjust the scanner exposure level in the
fine text mode.
Item Picture quality Density
Item
Set
range
Default
0 AUTO Auto 0 - 99 50
1 1.0 Exposure level 1
2 2.0 Exposure level 2
3 3.0 Exposure level 3
4 4.0 Exposure level 4
5 5.0 Exposure level 5
6 AUTO (H) Auto (Half-tone)
7 1.0 (H) Exposure level 1 (Half-tone)
8 2.0 (H) Exposure level 2 (Half-tone)
9 3.0 (H) Exposure level 3 (Half-tone)
10 4.0 (H) Exposure level 4 (Half-tone)
11 5.0 (H) Exposure level 5 (Half-tone)
Select other than 0 - 11, and
press [START] key.
Press [START] key, or
press [CUSTOM SETTINGS] key.
1
SIMULATION 46-23
EXP.LEVEL SETUP SCANNER(FINE). SELECT 0-11,AND PRESS
START.
0.AUTO 50 1.1.0 50 2.2.0 50
3.3.0 50 4.4.0 50 5.5.0 50
6.AUTO(H) 50 7.1.0(H) 50 8.2.0(H) 50
9.3.0(H) 50 10.4.0(H) 50 11.5.0(H) 50
50
SIMULATION 46-23
EXP.LEVEL SETUP SCANNER(FINE). INPUT VALUE 0-99, AND
PRESS START.
0.AUTO