REMOTE OPERATION VIA A NETWORK
3-6
Network Setup
Configure network protocol, Direct Print, and LDAP settings.
■
■■
■ General
Configure settings in the [GENERAL] and [Filter] screens.
■
■■
■ Protocol
Configure settings in the [TCP/IP], [NetWare], [AppleTalk] and [NetBEUI] screens.
■
■■
■ Services
Configure settings in the [DNS], [WINS], [SMTP], [SNMP] and [Kerberos] screens.
DNS and SMTP are required for e-mail.
■
■■
■ Direct Print
Configure settings in the [Raw Print] and [E-mail Print] screens.
"E-mail Print" is used to send e-mails with attachments to the machine and have the machine print the
attachments without the need for the printer driver. To use this function, the machine's e-mail account information
must be configured in the machine (page 3-7
).
■
■■
■ LDAP
LDAP is required when using an LDAP server and when using user authentication for the network scanner
function.
8
To Next Page
Loading...
