1
Press the MODE button to select the
operation mode.
AUTO HEAT COOL DRY
2
Press the ON/OFF button to start operation.
• The red OPERATION lamp ( ) on the unit
will light.
3
Press the THERMOSTAT button to set
the desired temperature.
AUTO/DRY MODE
• The temperature can be changed up to 2°C
above or below the temperature automatically
determined by the air conditioner.
COOL/HEAT MODE
• The temperature can be set within the
range of 18 to 32°C.
4
Press the FAN button to set the desired
fan speed.
AUTO SOFT LOW HIGH
• In the DRY mode, the fan speed is preset to
AUTO and cannot be changed.
5
To turn off the unit, press the ON/OFF
button again.
• The red OPERATION lamp ( ) on the unit
will turn off.
BASIC OPERATION
TIPS ABOUT AUTO MODE
In the AUTO mode, the temperature setting and
mode are automatically selected according to the
room temperature when the unit is turned on.
Modes and Temperature Settings
Room temp.
at operation
start-up
Automatic Operation
Mode
Temperature Setting
Below 21˚C
HEAT
23
˚C
21˚C-24˚C
DRY
Room Temp.
-
2
˚C
24˚C-26˚C
COOL
24˚C
26˚C-28˚C
COOL
25˚C
Above 28˚C
COOL
26˚C
2
5
3
1
4
To Next Page
Loading...
Need help?
General
