In this operation, the air conditioner fan works at
"extra high" speed with a setting temperature of
15°C in COOL and DRY modes and 32°C in HEAT
mode to rapidly cool or heat the room.
1
During operation, press the TURBO (
)
button.
• The remote control will display “ ”.
• The temperature display will go off.
• The green TURBO lamp (
) on the unit
will light up.
TO CANCEL
Press the TURBO button again.
•
The green TURBO lamp ( ) on the unit will turn off.
NOTE:
• You can not set the temperature or fan speed during
the TURBO operation.
•
To turn off the TURBO lamp, press the DISPLAY button.
• After the unit has run for 30 minutes in TURBO
operation, the fan setting will become the "HIGH"
speed, and temperature setting will become 18°C in
COOL and DRY modes.
TURBO OPERATION
1
In cooling or dry operation, vertical adjustment
louver is set obliquely upward to deliver cool air to
the ceiling in order to avoid direct airflow.
In heating operation, vertical adjustment louver is
set downward to deliver the warm air down to the
floor.
1
During operation, press the COANDA
AIRFLOW (
)
button.
• The remote control will display “ ”.
TO CANCEL
Press the COANDA AIRFLOW button again.
NOTE:
If you want the COANDA AIRFLOW setting in the
TURBO mode, press the COANDA AIRFLOW button
during the TURBO operation.
COANDA AIRFLOW
1
To Next Page
Loading...
Need help?
General
