Sharp AY-XPC12JHR - Basic Operation; Mode, Fan Speed, and Temperature Settings

GB-6
1
Press the MODE button to select the
operation mode.
AUTO HEAT COOL DRY
2
Press the ON/OFF button to start
operation.
• The red OPERATION lamp ( ) on the unit
will light.
3
Press the THERMOSTAT button to set
the desired temperature.
AUTO/DRY MODE
• The temperature can be changed in 1°C incre-
ments within the range of 2°C higher to 2°C
lower from the temperature automatically deter-
mined by the air conditioner.
COOL/HEAT MODE
• The temperature can be set within the
range of 18 to 32°C.
4
Press the FAN button to set the desired
fan speed.
AUTO SOFT LOW HIGH
• In the DRY mode, the fan speed is preset to
AUTO and cannot be changed.
5
To turn off the unit, press the ON/OFF
button again.
• The red OPERATION lamp ( ) on the unit
will turn off.
BASIC OPERATION
(Example: 1°C higher)
(Example: 2°C lower)
2
5
3
1
4