5 – 4
[2] HOW TO REMOVE PLASMACLUSTER UNIT(For the models with PLASMACLUSTER)
1) Take the tape off and cut the fixing band
2) Insert the thin board to center of gap and remove the hook of holder.
Please be careful not to damage the lead wire.
3) When assemble the plasmacluster unit,
insert part A to holder part indicated by big arrow.
HOOK
HOOK B
HOOK
HOOK B
HOOK
HOOK B
Lead the lead wire through
the left side of HOOK B
A
AY-ZP35PR
To Next Page
Loading...
