Sharp BD-HP20S

p
Disc Playback
Turning the Power On
Turning the power on
Press B on the remote control or on the
Player to turn on the power of the Player.
Language Setting
NOTE
• To select the DVD disc language, such as subtitle
language, etc., see page 26.
Changing the on-screen display
language
Press SETUP to display the SETUP
MENU screen.
1
Press SETUP or EXIT to exit.4
DISPLAYS THE TITLE LIST SETTINGS
ON SCREEN LANGUAGE
Press a/b/c/d to select the
language you want to display on the
screen, then press ENTER.
3
ENGLISH NEDERLANDS
PORTUGUÊS
SVENSKA
DEUTSCH
ESPAÑOL
FRANÇAIS
ITALIANO
Before Starting Playback
a (STANDBY) indicator
Red blinks Preparing for standby
Red on Standby
BD and DVD/CD mode indicators
Off No disc
Blue on Playing back
White on Disc stopped
White blinks Loading a disc
Indicators on the Player
I (ON) indicator
• If you press B again immediately after entering
standby, the Player may not turn on. If this
happens, wait for 10 seconds or more and then
turn on the power again.
Entering standby
Press B on the remote control or on the
Player to enter standby.
B (POWER)
DVD/CD mode indicator
BD mode indicator
a (STANDBY) indicator
I (ON) indicator
Green on Power on
Press a/b/c/d to select “ON
SCREEN LANGUAGE”, then press
ENTER.
2
• When you turn on the POWER, the MENU screen
automatically displays for a while.
Press EXIT to erase the display.
23
BD-HP20S_en_c.indd 23BD-HP20S_en_c.indd 23 2007/08/05 18:18:462007/08/05 18:18:46