Sharp CD-BH20 User Manual

E-16
Timer and sleep operation (Remote control only) (continued)
■ Sleep operation
The radio, disc, USB, Audio In, Line In, and Bluetooth can
all be turned off automatically.
1 Play back the desired sound source.
2 Press the SLEEP button.
3 Within 5 seconds, press the SLEEP button repeatedly
to select the time.
“Sleep 90”
“Sleep 80” ... “Sleep 10”
“Sleep Off”
4 “SLEEP” indicator will appear.
5 The unit will enter the power standby mode automati-
cally after the preset time has elapsed. The volume will
be turned down 1 minute before the sleep operation
nishes.
To conrm the remaining sleep time:
1 While “SLEEP” is indicated, press the SLEEP button.
To cancel the sleep operation:
Press the
(ON/STANDBY) button while “SLEEP” is indi-
cated. To cancel the sleep operation without setting the
unit to the standby mode, proceed as follows.
1 While “SLEEP” is indicated, press the SLEEP button.
2 Within 5 seconds, press the SLEEP button repeatedly
until “Sleep Off” appears.
■ To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and
wake up to CD the next morning.
1 Set the sleep time (see above, steps 1 - 5).
2 While the sleep timer is set, set the timer playback
(steps 2 - 10, page 15).
Sleep timer
setting
Timer playback
setting
Desired time
1-90 minutes
Sleep operation will
automatically stop
Timer playback start
time
End time

Sharp CD-BH20 Specifications

General

Brand	Sharp
Model	CD-BH20
Category	Stereo System
Language	English