E-19
As part of our policy of continuous improvement, SHARP
reserves the right to make design and specication chang-
es for product improvement without prior notice. The per-
formance specication gures indicated are nominal val-
ues of production units. There may be some deviations
from these values in individual unit.
■ General
Power source AC 100 - 240 V ~ 50/60 Hz
Power
consumption
25 W
Dimensions Width: 16 - 1/2” (420 mm)
Height: 5 - 1/8” (130 mm)
Depth: 11 - 1/4” (286 mm)
Weight 11.0 lbs. (5 kg)
Bluetooth
frequency band
2.402GHz - 2.480GHz
Bluetooth
maximum
transmit power
+ 4 dBm
Compatible
Bluetooth
A2DP (Advanced Audio Distribution
Bluetooth 2.1 +EDR
■ Amplier
Output power RMS: Total 50 W (25 W per
channel into 4 ohms at
1 kHz, 10% T.H.D.)
FTC: 16 W minimum RMS per
channel into 4 ohms from
60 Hz to 20 kHz, 10% T.H.D.
Output terminals Headphones: 16 - 50 Ω
(recommended: 32 Ω)
Input terminals Audio In (audio signal):
500 mV/47 k ohms
Line in (Analogue input):
500 mV/47 k ohms
■ CD player
Type Single disc multi-play compact disc
player
Signal readout Non-contact, 3-beam
semiconductor laser pickup
D/A converter Multi bit D/A converter
Frequency
response
20 - 20,000 Hz
Dynamic range 90 dB (1 kHz)
■ USB (MP3)
USB host
interface
● Complies with USB 1.1 (Full
Speed)/2.0 Mass Storage
Class.
● Support Bulk only and CBI
protocol.
Support le ● MPEG 1 Layer 3
Bitrate support ● MP3 (32 ~ 320 kbps)
Other ● Maximum total number of MP3
les is 65025.
● Maximum total number of
folders is 999 INCLUSIVE of
root directory.
● The ID3TAG information
supported are TITLE, ARTIST
and ALBUM only.
● Supports ID3TAG version 1 and
version 2.
File system
support
● FAT 16 / FAT 32
■ Tuner
Frequency range FM: 87.5 - 108.0 MHz
AM: 530 - 1,710 kHz
Preset 40 (FM and AM station)
■ Speaker
Type 1-way type speaker system
3” (8 cm) - 4 Ω - Full Range
Maximum input
power
50 W / channel
Rated input power
25 W / channel
Specications