Do you have a question about the Sharp CD-C811W and is the answer not in the manual?
Brand | Sharp |
---|---|
Model | CD-C811W |
Category | Stereo System |
Language | English |
Procedure for selecting the correct AC voltage for the unit.
Identification of front panel controls and indicators.
Identification of rear panel connectors and terminals.
Identification of front and surround speaker components.
Identification of remote control buttons and functions.
Procedure for setting the unit's clock.
Notes for remote control use and AM/FM interval, microcomputer reset.
Important safety and handling notes before disassembling the unit.
Steps for removing the CD mechanism and related parts.
Details on mechanism section and tuner section adjustments.
Test mode setup, CD automatic adjustments, and error codes.
Diagnosing CD section failures and turntable stop issues.
Diagnosing CD tray and control failures.
Diagnosing issues when CD controls work but playback fails.
Checking CD systems and diagnosing no sound output issues.
Pin functions for the IC1 servo amplifier.
Pin functions for IC3 driver and IC401 audio processor.
Pin functions for the IC2 servo/signal control IC.
Pin functions for IC2 servo/signal control and IC701 microcomputer.
Pin functions for the IC701 microcomputer.
Pin functions for IC701 microcomputer on CD-C821W.
Pin functions for IC701 microcomputer on CD-C821W.
Instructions on how to order replacement parts.
Explanation of codes used for capacitor and resistor part numbers.
Parts list for ICs, transistors, diodes, coils, and resistors.
Parts list for capacitors, variable resistors, vibrators, and other components.
Parts list for front and surround speaker boxes.
List of parts for the CD mechanism assembly.
List of parts for the main unit's cabinet assembly.