CD-M4000W//CP-M4000
lC1
1
VHiLC78645E-1: CD Servo (LC78645E)
(2/2)
enera purpose lnpu
output terminal 7. set it as the input terminal and open
1
LDD
/
Output
/
~~
-
In this unit, the terminal with asterisk mark
(*)
is (open) terminal which is not connected to the outside.
Be sure to supply the same potential to each power terminal. (VVDD, ADAVDD, VDD, LVDD, RVDD, XVDD)
Terminal witch is controlled by the power terminal
(VDD5V)
for a microcomputer interface
:
CE(61
pin), CL(62 pin), Di(63 pin),
DO(64
pin), WRQ(65 pin), RES(66 pin), DRF(67 pin)
-46-
To Next Page
Loading...
Need help?
General
