E-12
CD-M4000V(X)E2.fm01/6/12
ENGLISH
CD-M4000V
Basic Operation
- General Control -
General Control
„
Demonstration mode
The first time the unit is plugged in, the unit will enter the demonstration mode. You
will see words scroll.
To cancel the demonstration mode:
When the unit is in the power stand-by mode (demonstration mode), press the MON-
STER-BASS button. The demonstration mode will be cancelled and the display will
disappear.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the MONSTER-BASS button
again.
Note:
When the power is on, the MONSTER-BASS button can be used to select the extra
bass mode.
„
To turn the power on
Press the ON/STAND-BY button to turn the power on.
To set the unit to stand-by mode:
Press the ON/STAND-BY button again.
„
To change the display brightness (2 levels)
You can switch the display brightness by pressing the DIMMER button.
Dimmed Brightened
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
Need help?
General
