Sharp CD-M4000 User Manual

E-41
CD-M4000V(X)E5.fm01/6/12
ENGLISH
Advanced Features
- Enhancing Your System -
Enhancing Your System
The connection lead is not included. Purchase a commercially available lead as
shown below.
„
Listening to the playback sounds from
VCR, DVD, etc.
Note:
To prevent hum interference, place this unit away from a television.
„
To record on a tape
„
Headphones
z
Before plugging in or unplugging the headphones, reduce the volume.
z
Be sure your headphones have a 3.5 mm (1/8") diameter plug and are between 16
ohms and 50 ohms impedance. The recommended impedance is 32 ohms.
z
Plugging in the headphones disconnects the speakers automatically. Adjust the
volume using the VOLUME control.
VCR, DVD, etc.
To the
line output
sockets
Red
RCA lead
(not supplied)
White
Red White
1
Use a connection lead to connect the VCR, DVD, etc. to the VIDEO/
AUX sockets.
When using video equipment, connect the audio output to this unit and the video
output to a television.
2
Press the ON/STAND-BY button to turn the power on.
3
Press the VIDEO/AUX button.
4
Play the connected equipment.
1
Insert a cassette in the TAPE 2 cassette compartment.
2
Press the VIDEO/AUX button.
3
Press the REC PAUSE [ (TAPE)] button.
4
Press the ( /SELECT/RESUME) or button.
5
Play the VCR, DVD, etc.
Downloaded from: http://www.usersmanualguide.com/

Sharp CD-M4000 Specifications

General

Brand	Sharp
Model	CD-M4000
Category	Stereo System
Language	English