03/12/19 CD-SW200 26- 33.fm
32
CD-SW200
Tape Recording
Recording on a cassette tape (continued)
Recording from a CD or MP3/WMA disc
You can record the desired disc using the DIRECT PLAY button.
To stop recording:
Press the (TAPE ) button.
The disc and tape will stop.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.
3 Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
4 Press the button.
Recording will be paused.
5 Press one of the 1 - 5 buttons to select the desired disc.
6 Within 5 seconds, press the DIRECT PLAY button to start
recording.
Recording is started from the selected disc. When the play-
back of the last track is finished or the end of the tape is
reached, the disc and the cassette will stop automatically.
Playback of the disc will start approximately 7 seconds after
the tape starts.
To Next Page
Loading...
Need help?
General
