Sharp CE-515P - Page 28

(2) To plot “ABCD” using the smallest letters.
10 — OPN _ “LPRT"”
20 . CONSOLE _.0,0
30 _ LPRINT _CHRS$ _&1B;“a"
40 _ LPRINT _CHR$._& 1B ;"?a”
50 . LPRINT . "ABCD"
60 _ END
(3) To print lines in four colors.
10 _ OPN _ “LPRT"”
20 _ CONSOLE..0,0
30 _ LPRINT _CHR$ _& 1B ;"b”
40 _ LPRINT . “I"
50 _FOR_A=0_T0_3
60 _ LPRINT_CHR$ __& 1B;CHR $ (& 30 + A)
70 _ LPRINT _. "J 100, 0"
80 _ NEXT _A
90 __ LPRINT _“"H"
100 _ END
* To connect with the SHARP’s PC-1500 {1500A) and CE-158 by using on RS-232C interface use
SETCOM __ 1200, 8, N, 1
(SETCOM __ 1200, 7, N, 2)
OUTSTAT _ 0
SETDEV _ PO
instead of
OPN “LPRT”
(5) For connection with SHARP’s PC-5000 (RS-232C interface)
@ To plot a program list using standard letters.
OPEN “COM1 : 1200, N, 8, 1, CS@, DS65008, CD@"
“AS #2
PRINT #2, CHR$ (27) ; “? b”
PRINT #2, CHRS$ (27) ; “a”
CLOSE #2
LIST, “COM1 : 1200, N, 8, CS®, 1, DS65000, CD@"’
(2) To plot “ABCD" using the smallest letters.
10 OPEN “COM1 : 1200, N, 8, 1, CS@, DS65000, CDO" AS #2
20 PRINT #2, CHR$ (27) ; “?a"
30 PRINT #2, CHRS$ (27) ; "a”
40 PRINT #2, “ABCD”
50 CLOSE #2
60 END
27