Sharp CE-515P - Page 9

Paper Roll stem
\74
Note: Creases or folds in the paper may cause irregular feeding and improper plotting.
® If the leading edge of the paper is not straight or if the paper is inserted at an angle, the
paper may misfeed or catch.
® |f paper misfeeds or catches, press the paper rewind key to rewind the paper.
3. Paper
Either sheet paper or roll paper can be used with this plotter.
(1) Sheet paper
Paper quality: Normal smooth white paper or postcard-type stock
Paper thickness: 70 to 400 micrometers {2.8 to 15.8 mils thick)
Size: Letter size
A4 size
Bb size
Ab size
Ab size
216 (W) x 280 (H) mm (8.5 x 11 in.)
210(W) x 297 (H) mm (8.3 x 11.7 in.)
182 (W) x 257 (H) mm (7.2 x 10in.)
148 (W) x 210 (H) mm (5.8 x 8.3 in.)
105 (W) x 148 (H) mm (4.1 x 5.8 in.)
Any kind of smooth paper or postcard-type stock can be used. However, the life of the pens
and plotting quality will vary according to the media used, which should be free of loose
fibers and any accumulation of dust.
Ink may bleed, blur, or wick depending on the absorption characteristics of the paper. Keep
this in mind when selecting paper.