Sharp CS-2635RH User Manual

14
RESETTING THE UNIT
Strong impacts, exposure to electrical fields, or other
unusual conditions may render the unit inoperative,
and pressing the keys will have no effect. If this
occurs, you will have to press the RESET switch on
the bottom of the unit. The RESET switch should
be pressed only when:
• an abnormal event occurs and all keys are
disabled.
• you install or replace the battery.
Notes:
• Pressing the RESET switch will clear the stored
tax / discount rate and conversion rate, other data
stored in the memory.
• Use only a ballpoint pen to press the RESET
switch. Do not use anything breakable or anything
with a sharp tip, such as a needle.
• Connect the power supply plug to an outlet, then
press the RESET switch after pressing the power
on switch. Check that “0.” is displayed.
CS-2635RH(AXO)-Eng 12.6.20, 8:40 AMPage 14 AdobePageMaker6.5J/PPC

Sharp CS-2635RH Specifications

General

Type	Printing
Form factor	Desktop
Product color	Black, Silver
Digits	12 digits

Weight and Dimensions

Weight	2000 g
Dimensions (WxDxH)	250 x 345 x 87 mm