Sharp CS-2635RH - Page 8

6
5/4
ROUNDING SELECTOR:
Example: Set decimal selector to “2”.
4 ÷ 9 = 0.444 ... , 5 ÷ 9 = 0.555 ...
Note: The decimal point floats during
successive calculation by the
use of or .
If the decimal selector is set to
“F” then the answer is always
rounded down ( ).
DECIMAL SELECTOR:
Presets the number of decimal
places in the answer.
In the “F” position, the answer is
displayed in the floating decimal
system.
PAPER FEED KEY
CONVERSION KEY:
This key is used to obtain a value by
dividing a given number with a specified
conversion rate.
CONVERSION KEY:
This key is used:
• to store the conversion rate (by the
use of the rate setting mode
selector).
• obtains a value by multiplying a given
number with a specified conversion
rate.
• to recall the presently stored rate for
check. Press first to clear the
calculation register and reset an error
condition, then press . The
conversion rate is printed with the
symbol “TC”.
LAST DIGIT CORRECTION KEY
CLEAR ENTRY KEY:
Clears numbers entered prior to use of
a function key.
Also used to clear an overflow error
caused by an entry.
4 9 5 9
0.45 0.56
5/4 0.44 0.56
0.44 0.55
CS-2635RH(AXO)-Eng 12.6.20, 8:40 AMPage 6 AdobePageMaker6.5J/PPC