ENGLISH
1
3
COOL MODE
Drainage nozzle
Stopcock
E-9
Install the exhaust hose (See Page 8), turn the drainage nozzle to the CLOSE
position, and check the drainage nozzle is covered with the stopcock.
1
4
2
3
“CLOSE position”
1
Press the MODE button to select COOL
mode.
COOL DEHUM FAN VENT
2
Press the ON/OFF button to start op-
eration.
• The red OPERATION lamp (
) on the
unit will light.
3
Press the TEMPERATURE button to set
the desired temperature.
• The temperature can be set within the range
of 18°C to 32°C.
4
Press the FAN button to set the de-
sired fan speed.
AUTO QUIET LOW HIGH
TO TURN OFF
Press the ON/OFF button again.
• The red OPERATION lamp (
) on the unit
will turn off.
To Next Page
Loading...
