Sharp CV-P09FR User Manual

ENGLISH
FAN MODE
1
5
2
3
VENTILATION MODE
1
4
5
2
3
E-11
Install the exhaust hose (See Page 8), turn the drainage nozzle to the CLOSE
position, and check the drainage nozzle is covered with the stopcock.
Install the exhaust hose (See Page 8), turn the drainage nozzle to the CLOSE
position, and check the drainage nozzle is covered with the stopcock.
1
3
2
1
3
2
In this mode, the air conditioner simply circulates the air without cooling it.
In this mode, the air conditioner ventilates the air to outdoors.
1
Press the MODE button to select FAN mode.
COOL DEHUM FAN VENT
2
Press the ON/OFF button to start operation.
• The red OPERATION lamp (
) on the unit will light.
• The temperature cannot be set.
3
Press the FAN button to set the desired fan
speed.
QUIET LOW HIGH
TO TURN OFF
Press the ON/OFF button again.
• The red OPERATION lamp (
) on the unit will turn off.
1
Press the MODE button to select VENT mode.
COOL DEHUM FAN VENT
2
Press the ON/OFF button to start operation.
• The red OPERATION lamp (
) on the unit will light.
• The temperature cannot be set.
3
Press the FAN button to set the desired fan
speed.
• Although the louvers are closed and no air blows out
into the room, the external ventilation fan speed
changes.
QUIET LOW HIGH
TO TURN OFF
Press the ON/OFF button again.
• The red OPERATION lamp (
) on the unit will turn off.

Sharp CV-P09FR Specifications

General

Cooling capacity (max)	- BTU/h
Dehumidifying capacity	1.167 l/h
Cooling capacity in watts (max)	2120 W

Weight and Dimensions

Weight	36000 g