Sharp CV10CTXW - OPERATION OF WIRELESS REMOTE CONTROL; Remote Control Usage; Remote Control Cautions

EN-19
ENGLISH
Point the remote control towards
the units signal receiver window and
press the desired button. A beep will
sound when the unit receives the
signal.
• Makesurenothing,suchascurtains,
blocks the signal receiver window.
•
For good reception of signal, the distance
between operator and the unit should be no
more than 5 meters.
CAUTION
• Donotexposethesignalreceiverwindowtodirectsunlight.Thismay
adversely affect its operation. If necessary, close the curtains to block out
the sunlight.
• Useofauorescentlampinthesameroommayinterferewithtransmission
of the signal.
• Theunitmaybeaffectedbysignalsemittedfromotherremotecontrollers
fortelevisions,VCRsorotherequipmentusedinthesameroom.
• Donotleavetheremotecontrolexposedtodirectsunlightornearaheater.
Protect the remote control from moisture and shock which can discolor or
damage it.