Sharp DV-600S - Direct Scene and Track Selection

DV-600S
DV-600H
Pin No. Pin name Type Direction
126 GCLK1 I I
128 XO O O
129 GCLK I I
135, 137
PLLGFG[1:0] I I
136 PLLCA – –
Microcomputer / CD·subcode interface terminal list
Pin No. Pin name Type Direction Function
When 16-bit bus width is selected, (HWID=low)
It works as the microcomputer data bus of 9th bit.
When 8-bit bus width is selected, (HWID=high)
It works as the terminal to input the subcode synchronous signal from the
subcode interface of CD-DSP.
When 16-bit bus width is selected, (HWID=low)
It works as the microcomputer data bus of 9th bit.
When 8-bit bus width is selected, (HWID=high)
It works as the terminal to input the frame synchronous signal from the
subcode interface of CD-DSP.
It works as the microcomputer bus of bits 7 thru 0.
10
HD9 3-S I/O
(SCSYN) (I) (I)
11
HD8 3-S I/O
(SCFRM) (I) (I)
12
14-17 HD[7:0] 3-S I/O
19-21
Microcomputer interface / CD·subcode interface
PLL interface terminal list
Pin No. Pin name Type Direction Function
Test terminal. Don’t connect it.
If quartz oscillator is connected to GCLK terminal, connect the other
terminal of quartz oscillator to this pin.
Master clock input terminal of device Input 27 MHz.
PLL is set. Before power-up, fix it.
External capacitor terminal for PLL.
PLL interface
Pin No. Pin name Type Direction
102
C7 3-S O
(N.C.) (3-S) (O)
104
C6 3-S O
(N.C.) (3-S) (O)
105
C5 3-S O
(N.C.) (3-S) (O)
106
C4 3-S O
(OSDPLT) (3-S) (I)
107
C3 3-S O
(OSDPEL3) (3-S) (I)
Video/OSD interface terminal list
Pin No. Pin name Type Direction Function
Video8 register = 0
Color difference signal output terminal of 7th bit.
Video8 register = 1
The terminal becomes invalid.
Video8 register = 0
Color difference signal output terminal of 6th bit.
Video8 register = 1
The terminal becomes invalid.
Video8 register = 0
Color difference signal output terminal of 5th bit.
Video8 register = 1
The terminal becomes invalid.
Video8 register = 0
Color difference signal output terminal of 4th bit.
Video8 register = 1
Input terminal to select pallet table of OSD.
For OSDPLT=low, pallet table 0 is used.
For OSDPLT=high, pallet table 1 is used.
Video8 register = 0
Color difference signal output terminal of 3th bit.
Video8 register = 1
It works as the OSD pallet data input terminal of 3rd bit.
Video interface · OSD interface
11-14