EasyManua.ls Logo

Sharp DV-600S - Page 32

Sharp DV-600S
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DV-600S
DV-600H
Pin No. Pin name Type Direction Function
Video8 register = 0
Color difference signal output terminal of 2th bit.
Video8 register = 1
It works as the OSD pallet data input terminal of 2rd bit.
Video8 register = 0
Color difference signal output terminal of 1th bit.
Video8 register = 1
It works as the OSD pallet data input terminal of 1rd bit.
Video8 register = 0
Color difference signal output terminal of 0th bit.
Video8 register = 1
It works as the OSD pallet data input terminal of 0rd bit.
109
C2 3-S O
(OSDPEL2) (3-S) (I)
110
C1 3-S O
(OSDPEL1) (3-S) (I)
111
C0 3-S O
(OSDPEL0) (3-S) (I)
Video/OSD interface terminal list
Video interface · OSD interface
Pin No. Pin name Type Direction Function
Clock gained by dividing VCLK x 2 signal into halves.
Input terminal to switch video master/slave.
VMASTER=L
Video master mode. Video synchronizing signal and video clock are
internally generated.
HTYPE=H
Video slave mode. Video synchronizing signal and video clock are re
ceived from the external.
Video output enable input terminal
VDEN#=H
Y [7:0] and C [7:0] terminals are made to be disable (3-state).
VDEN#=L
Y [7:0] and C [7:0] terminals are made to be enable.
Note: C [7:0] terminal is the multiplexed terminal as OSDPLT [3:0] and so on.
For Video8 register = 0, VDEN# terminal is valid for Y [7:0] alone.
Composite blank output terminal. Horizontal/vertical blanking area and
polarity are programmable.
Input/output terminal of vertically synchronous signal. Polarity and synchronous
signal length are programmable.
Input/output terminal of horizontally synchronous signal.Polarity and
synchronous signal length are programmable.
Input/output terminal for identification of even/odd number field. Polarity is
programmable.
Video8 register = 0
Brightness signal output/input terminal.
Video8 register = 1
Brightness/color difference multiplex terminal as ITU-T656
Terminal to input video clock or output 27 MHz.
84 VCLK 3-S I/O
85 VMASTER I I
87 VDEN# I I
88 CBLANK O O
89 VSYNC 3-S I/O
90 HSYNC 3-S I/O
91 FI 3-S I/O
92
94-97 Y[7:0] 3-S O
99-101
124 VCLK X 2 3-S I/O
Video interface terminal list
Video interface
Pin No. Pin name Type Direction Function
Audio (PCM) input terminal.
Stereo x1
Audio (PCM) output terminal.
Stereo x3
S/PDIF output terminal AC-3 stream or PCM stream can be output.
Moreover, it works as the audio output terminal of 7th and 8th channels
Left/Right clock output terminal of AOUT [2:0] and AIN.
The polarity is programmable.
Bit clock output terminal of AOUT [2:0] and AIN.
The polarity is programmable.
Audio master clock input/output terminal.
256 Fs or 386 Fs can be used.
Audio interface terminal list
Pin No. Pin name Type Direction
112 AIN I I
114-116 AOUT[2:0] O O
117
S/PDIF
OO
(AOUT[3])
118 ALRCLK O O
119 ABCLK O O
132 AMCLK 3-S I/O
Audio interface
11-15

Other manuals for Sharp DV-600S

Related product manuals