Sharp DV-NC70 - Disassembly Method; Step-by-Step Disassembly Procedure

9
DV-NC70/W
DV-NC70X/RU
6. DISASSEMBLY METHOD
6-1. DISASSEMBLY METHOD
1) Removing the cabinet.
(1) Remove the four screws 1 and one screw 2.
2) Removing the front panel.
(1) Remove the two screws 3.
(2) Release the six hooks 4.
3) Removing the front PWB.
(1) Release the one hook 5 and tilt the PWB
toward you to remove it.
(2) Release the one hook 6 and tilt the PWB
toward you to remove it.
4) Removing the DVD mechanism.
(1) Remove the four screws 7 to remove the DVD REINF.
angle.
(2) Remove the two screws 8 and two screws 9.
(3) Remove the two screws 0 to remove the Angle (DVD) .
(4) Remove the DVD Shield (lower) q.
2
1
1
4
3
5
6
4
4
4
9
10
9
10
8
7
12
11
(5) Remove the four screws w to remove the DVD Main PWB
Unit from Angle (DVD).