Sharp DV-SL10 - PLAYING A DISC; Fast Forward; Reverse Search; Slow Forward; Slow Reverse; Zoom

–
14
–
EN
PLAYING A DISC
During playback, press FWDg or REVh repeated-
ly to select the required forward or reverse speed: x2, x8,
x50, x100.
• If you are using FWD g or REVh on the front panel,
press and hold it for more than 1.5 sec (the longer you
hold it, the faster the speed will be) . When you reach
the desired speed, release the button.
• For video CDs, the speed is fixed at x2, x8 or x30.
• For audio CDs, the speed is fixed at x16.
• For MP3, the speed is fixed at x8.
To return to normal playback, press PLAY.
2
1
VCDDVD-RWMP3CDDVD
Fast Forward / Reverse Search
During playback, press STILL/PAUSE.
Press FWDg or REVh .
• Slow motion playback will begin and sound will be
muted.
Press FWDg or REVh repeatedly to select
the required speed: 1/16, 1/8, 1/2 of the normal
playback.
• If you are using FWD g or REVh on the front panel,
press and hold it for more than 1.5 sec (the longer you
hold it, the slower the speed will be). When you
reach the desired speed, release the button.
To return to normal playback, press
PLAY.
• You cannot play the VCD in reverse slow motion.
4
3
2
1
VCDDVD-RWDVD
Slow Forward / Slow Reverse
The Zoom function allows you to enlarge the video image
and to pan through the enlarged image.
Press ZOOM during playback.
• Playback will continue.
Press ZOOM repeatedly to select the required
zoom factor: x2, x4 or OFF.
Use Arrow ( L / K / B / s ) to move the zoomed
picture across the screen.
To exit zoom mode, press ZOOM to OFF.
NOTES:
• Zooming function does not work while disc menu is
shown.
• x4 zoom is not available on some discs.
• Only x2 zooming is available for VCD.
4
3
2
1
VCDDVD-RWDVD
Zoom
There are three ways to begin playback on an Audio CD at a
specific Track.
Using the Numerical key pad
Press the numerical key pad to enter the desired
Track number.
• Playback will start at the selected track.
• For single digit tracks (1-9), press a single number (eg.
track 3, press 3).
• To play track 26, press +10, 2, 6 on the numerical key
pad.
Using the DIRECT SKIP.
Press DIRECT SKIP.
• The track search display appears.
Within 30 seconds, select a desired track number using
the
numerical key pad. For single digits press “0” first.
• Playback will start at the selected track.
Using the SKIP HG
During playback, press
SKIP
G to move to the next track.
Press it repeatedly to skip subsequent tracks. Press
SKIP
H to go back to the beginning of the current track. Press it
repeatedly to go to the previous tracks.
• Track number will appear briefly on the DVD display
panel.
• If SKIP is pressed while the playback is paused, the
playback will be paused again after skipping to the next
track.
NOTE:
• SKIP HGare not available when playback is
stopped.
2
1
1
VCDCD
Track
VR mode
VR mode
VR mode
without PBC function
E57B9QD.QX3 03.5.29 4:26 PM Page 14