E-2
Failure to follow this instruction may
result in death or serious injury.
Warning
Cautions
Failure to follow this instruction may
result in injury or damage to property.
Precautions
Precautions
Warning
Prohibited
Prohibited
Prohibited
Prohibited
Prohibited
Prohibited
Prohibited
Prohibited
Musts
Musts
DW-R249A_eng
Various symbols are used throughout this manual
and on the product to alert you to points relating
to safe use of this product.
These symbols are classified according to the
seriousness of the risk involved if they are
ignored and explained below.
Please read this section carefully and follow the
instructions.
Do not operate the unit at voltages
other than the rated voltage of 220V.
Using this product at any other voltage may
result in electric shock or fire.
Make sure that the power plug is not
covered with dust before inserting the
plug into the power socket.
Do not place the unit near any heat
sources.
Otherwise resin
material in the
product may melt
and catch fire.
Do not modify the unit. This unit should
not be disassembled or repaired by
persons other than a qualified
technician.
If repair is required, please consult
the SHARP Service Center.
Otherwise fire, electric shock or injury may
result.
Musts
If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
Prohibited
When any abnormality (e.g. a burning
smell) is noticed, turn the power off,
unplug the unit and consult the SHARP
Service Center.
Do not place any spray cans or other
hazardous materials near the unit.
Also make sure not to place any ignition
hazard materials (gasoline, thinner) near the
unit. Otherwise these materials could ignite
or explode, resulting in a fire.
Do not insert your finger or foreign
objects (pins, wire, sticks) into the air
outlet or air intake.
Do not try to take out the plug by pulling
the power cord in order to stop operation.
Otherwise electric shock or fire may result.
Do not modify or cause damage to
the power cord in any way.
Do not connect this product using
joined electric cords or extension
cords, or sharing a power socket with
other electrical appliances.
Otherwise there is a
risk of electric shock,
heat or fire.
Handle the power cord with care.
Avoid damaging it, bending it
sharply, pulling, twisting, bundling
or heating it, placing heavy
objects on it or getting it caught
between objects. Otherwise the
power cord may be damaged,
resulting in electric shock or fire.
Otherwise fire, electric
shock or injury may
result.
If the unit continues to
be operated despite
signs of abnormality,
a breakdown, electric
shock or fire may
result.
Regularly wipe off the power
plug with a dry cloth.
Dust on the plug will prevent
a proper connection, which
may result in electric shock
and fire.
A fan is rotating at
high speed inside
the unit. Do not put
your hands inside
the unit to avoid
injury, electric
shock and damage
to the unit.
To Next Page
Loading...
