3 4
1、 As shown in the figure, align the electric
interface with the aluminium tube
interface, and then gently push it. After hearing a "click", the installation is completed
(when disassembling, just press and hold the latch button, and pull it down and away).
２、 As shown in the figure, align the aluminium tube joint with the main body
interface, and then gently push it. After hearing a "click", the installation is completed
(when disassembling, just press and hold the latch button, and pull it down and away).
扁吸安装
Accessories
Ⅰ．Use of floor brush
Introduction of product components Using method
Ba tter y release
button
On/off button
Dust cup
latch
Display screen
Aluminium tube latch
Aluminium tube
Charger HangerLong flat
Nozzle
Triangular
Nozzle
Spiral rolling Water
tankbrush
Cleaning
brush
Mite-removing
Nozzle
To Next Page
Loading...
